SLG-3-4 — Line Connection Insulation Cover
Custom-molded HTV silicone cover for insulating exposed line connection points, isolating links, and jumper connections on overhead MV distribution lines — a critical protection point where bare conductor meets equipment.
✔ OEM / ODM · ✔ In-house tooling & molding · ✔ Type-test reports on request · ✔ Reply in 24h
Overview
The SLG-3-4 is a silicone-rubber insulation cover designed specifically for line connection points, isolating links and jumper connections on MV overhead distribution lines. Unlike equipment-specific covers (BLQ for arresters, FCO for cutouts), SLG-3-4 protects the conductor-to-equipment interface — the bare metal clamp or bolted connection where a line conductor joins a piece of equipment such as an isolating link, a jumper loop, or a tap-off point.
These connection points are among the most wildlife-vulnerable locations on a distribution line: a bird landing on a bare isolating-link bolt or an animal bridging two jumper connections can cause a phase-to-ground or phase-to-phase fault. The SLG-3-4 cover sleeves the entire connection assembly, creating a continuous insulating barrier from the conductor insulation to the equipment body.
Molded from HTV silicone rubber — hydrophobic, UV-stable, anti-tracking, flame-retardant. The cover is split/slit for wrap-around installation on already-connected conductors; live-line installable with hot-stick tools. Custom dimensions to match your specific conductor size and connection type.
Specifications
| Model | SLG-3-4 |
|---|---|
| Material | High-Temperature Vulcanized (HTV) Silicone Rubber |
| Designed For | Line connection points · isolating links · jumper connections · tap-off points |
| Key Properties | Hydrophobic · UV-resistant · anti-tracking · flame-retardant · self-extinguishing |
| Operating Temperature | -60 °C ~ +200 °C |
| Color | Red (standard); Grey and custom available |
| Installation | Wrap-around / slit design; live-line installable |
| Package | 1 PC / SET (sold individually per connection point) |
| Standard | IEC / GB compliant; ISO 9001 factory |
| Customization | Conductor diameter, connection type, color, OEM label |
Key Features
Connection-Point Focused
Designed to insulate the exact point where a conductor meets equipment — the most common unprotected live spot on distribution lines.
Wrap-Around Design
Split/slit construction lets you install the cover on an already-connected conductor without disconnecting anything.
Wildlife Barrier
Covers the bare metal of connection bolts and clamps — the perch points that cause most animal-related line trips.
Conductor-Sized Fit
Entry/exit ports molded to your specific conductor OD for a snug seal — no gap for moisture or wildlife ingress.
Weatherproof Silicone
Hydrophobic, UV-stable, anti-tracking HTV silicone — decades of outdoor service.
Live-Line Ready
Install with hot-stick tools on energized lines — no outage needed for retrofit.
Applications
Isolating Link Connections
Insulating the bolted connections on isolating links used for line sectionalizing.
Jumper & Tap-Off Points
Covering jumper loop connections and line tap-offs to transformers or laterals.
Substation Bus Connections
Insulating bolted busbar-to-equipment joints in compact MV substations.
Wildlife Mitigation Retrofits
Quick-to-install covers for existing lines in areas with high animal-caused outage rates.
Frequently Asked Questions
What is the difference between SLG-3-4 and the G10 terminal covers?
What conductor sizes does SLG-3-4 accommodate?
Can I install this on an existing, energized connection?
Why is SLG-3-4 sold as 1 PC/SET instead of 3?
Can the cover handle both straight and angled connections?
Need SLG-3-4 for Your Line Connections?
Send conductor type + size and connection configuration — we’ll size and quote within 24h.
Request a Quote
Send your requirement, model or drawing — we reply within 24 hours.
Thank You!
Your inquiry has been received.
We'll reply with a detailed quote within 24 hours.